Master 3410

Availability: In Stock
Weight: 0.00kg
Dimensions: 0.00cm x 0.00cm x 0.00cm

Master 3410 measures important electrical parameters in single phase, 3 phase 4 Wire and 3 phase 3 Wire Network & replaces the multiple analog panel meters.

It measures electrical parameters like AC Voltage, AC Current, Frequency, kVA, Neutral Current (for 4 Wire only), Total System Current Demand, Total System Maximum Current Demand, Total System kVA Demand and Maximum Total System kVA Demand.

The instrument measures 18 electrical parameters of 3 Phase Network.
High Accuracy: Better than 0.5 % for Voltage, Current and kVA

On site programmable PT/CT ratios
It is possible to program primary of external potential Transformer (PT), primary of external Current Transformer (CT) on site via front panel keys by entering into Programming mode.

User selectable CT Secondary 5A/1A
The secondary of external Current Transformer (CT) can be programmed on site to either 5A or 1A using front panel keys.

User selectable 3 phase 3W or 4W
User can program on site the network connection as either 3 Phase 3 Wire or 4 Wire using front panel keys.

Low back depth
The instrument has very low back depth (behind the panel) of less than 80 mm.

True RMS measurement
The instrument measures distorted waveform up to 15th Harmonic.

Neutral Current Measurement (for 4 Wire only)
The instrument measures neutral current in 3 Phase 4 wire unbalanced load network.

Total System Current Demand & Total System Maximum Current Demand
The instrument measures system current demand and Maximum System Current demand. The demand time can be programmed on site from 8, 15, 20 and 30 minutes using front panel keys.

Total System kVA Demand & Maximum Total System kVA Demand
The instrument measures system kVA Demand and Maximum System kVA demand. The demand time can be programmed on site from 8, 15,20 and 30 minutes using front panel keys.

System kVA
The instrument measures the system kVA of a single phase ,3 Phase 3 wire or 4 Wire system.

High brightness 3 line 4 digits LED display
Simultaneous display of 3 Parameters. The 4th additional digit for each parameter gives better resolution and high accuracy.

Simple operation with easy to use front keys
There are two push button keys (Up & down) on front panel for Easy operation

Back scrolling of Parameter screens
Using the "down" key, it is possible to scroll back to the previous screen while searching the desired parameter screen.

Enclosure Protection for dust & water
Conforms to IP 54 (for front face) as per IEC60529

EMC Compatibility
Compliance to International standard IEC 61326